[c-nsp] Configuration buffer on 7206

[Nick Voth]

Thanks Ziv. The comression works and here's the output of the dir nvram:

Directory of nvram:/

  105  -rw-       20290                    <no date>  startup-config
  106  ----          27                    <no date>  private-config
  107  -rw-       20290                    <no date>  underlying-config
    1  ----          32                    <no date>  persistent-data
    2  -rw-           0                    <no date>  ifIndex-table
    3  -rw-        1661                    <no date>  cerf_report

Is any of that expendable?

Thanks,

-Nick Voth


> From: Ziv Leyes <zivl at gilat.net>
> Date: Mon, 28 Apr 2008 23:52:40 +0300
> To: Nick Voth <nvoth at estreet.com>, "cisco-nsp at puck.nether.net"
> <cisco-nsp at puck.nether.net>
> Conversation: Configuration buffer on 7206
> Subject: RE: Configuration buffer on 7206
> 
> Did you try using "service compress-config" on the global config?
> Also check what else do you have saved on the NVRAM, perhaps there is some
> unnecesary file that is taking up space
> Type dir nvram: and post us the output.
> Ziv
> 
> ________________________________________
> From: cisco-nsp-bounces at puck.nether.net [cisco-nsp-bounces at puck.nether.net] On
> Behalf Of Nick Voth [nvoth at estreet.com]
> Sent: Monday, April 28, 2008 11:39 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Configuration buffer on 7206
> 
> Hello folks,
> 
> I just started running in to this error when doing a "copy run start"
> command on my 7206VXR:
> 
> ==============
> copy run start
> Destination filename [startup-config]?
> Building configuration...
> 
> % Warning: Saving this config to nvram may corrupt any network management or
> security files stored at the end of nvram.
> Continue? [no]: no
> % Configuration buffer full, can't add command: ntp clock-period 17179886
> %Aborting Save. Compress the config, Save it to flash or Free up space on
> device[OK]
> ==============
> 
> I've saved my running config to disk0 and to an off site FTP server, but I'm
> stumped about how to get the running config to be saved to the
> "startup-config" in nvram...
> 
> Our config is pretty large because we have over 1000 VCI's configured on an
> ATM DS3 card.
> 
> Any help would be wonderful!
> 
> Thanks,
> 
> -Nick Voth
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
> 
> 
> 
> ******************************************************************************
> ******
> This footnote confirms that this email message has been scanned by
> PineApp Mail-SeCure for the presence of malicious code, vandals & computer
> viruses.
> ******************************************************************************
> ******
> 
> 
> 
> 
> 
> ******************************************************************************
> ******
> This footnote confirms that this email message has been scanned by
> PineApp Mail-SeCure for the presence of malicious code, vandals & computer
> viruses.
> ******************************************************************************
> ******
> 
> 
>