[c-nsp] OPSF - VRF Problem

[Anton.Schweitzer at o2.com]

Hi,

i discoverd the following Problem :

When i try to configure a vrf ospf process i got get the following error :

Apr 29 10:26:58.785 MESZ: %OSPF-4-NORTRID: OSPF process 1332 cannot 
start. There must be at least one "up" IP interface, for OSPF to use as 
router ID


Cisco says :

Explanation    OSPF failed while a router ID was being allocated from 
the IP address of one of its interfaces.

Recommended Action    Ensure that there is at least one interface is 
operational (up) and has a valid IP address.
If there are multiple OSPF processes running on the router, each 
requires a unique router ID.
You must have enough operational (up) interfaces so that each of them 
can obtain a router ID.

So do i need a interface within the vrf, which i actually have in UP ?

VRF-NAME                      123:123           Serial1/1.101

Serial1/1.101          A:B:C:D  YES manual up                    up

I can NOT configure a router ID, when i configure router ospf XXX vrf YYY 
the router does not switch to the configure-router mode.....


IOS : IOS (tm) 7200 Software (C7200-K4P-M), Version 12.0(28)S6b, RELEASE 
SOFTWARE (fc1)

Cheers

Anton



Anton Schweitzer
Senior Specialist Implementation
Implementation Business

o2 (Germany) GmbH & Co.OHG
Georg Brauchle-Ring 23-25, D-80992 München
Tel      +49(0)89-2442-5794
Mobil +49(0)176-23407715
Fax      +49(0)89-2442-4281
anton.schweitzer at o2.com

o2 (Germany) GmbH & Co. OHG • Georg-Brauchle-Ring 23-25 • 80992 München • 
Deutschland • www.o2.com/de

Ust.-Id.-Nr. DE 811 889 638. Amtsgericht München HRA 70343. 
Gesellschafter: o2 (Germany) Management GmbH. Amtsgericht München HRB 
109061 und
o2 (Germany) Verwaltungs GmbH. Amtsgericht München HRB 121389, beide 
ebenda.
Geschäftsführer beider Gesellschafter: Jaime Smith Basterra, Vorsitzender. 
Antonio Botas Banuelos. Andrea Folgueiras. André Krause. Lutz Schüler. 
Carsten Wreth.