[c-nsp] Port down 6500 warning via syslog

[Holemans Wim]

Thanks for all who answered to my question.

The command is :
logging event link-status default

Wim Holemans

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Holemans Wim
Sent: dinsdag 29 april 2008 10:38
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Port down 6500 warning via syslog

I know I have seen this before, but I can't find the article.
On most cisco IOS switches, you get syslog messages if a port goes down
or up. On a 6500 this is not the case.
But I remember seeing an article in which a way was shown how to enable
this feature on 65XX IOS.
Anyone has a pointer to this article or a short description on how to
enable port down/up syslog messages ?

Thanks,


Wim Holemans
Netwerkdienst Universiteit Antwerpen
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/