[c-nsp] DSCP / NAT

[Church, Charles]

I thought that was the default action for most NATing devices?  I'm
pretty sure the 12.4 Cisco devices I've used all do that. 


Chuck 
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
Sent: Monday, August 04, 2008 8:45 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] DSCP / NAT


Hi folks.

 

This is probably a dumb question ;)  Is there any way for a packet that
hits
NAT to have it's DSCP bits honored?

 

For example:

 

Interface FastE0 - public IP - ip nat outside

 

Interface FastE1 - private IP - ip nat inside

 

Device attached to FastE1 sends DSCP 46 - looking for a way for that to
pass
through without remarking it on FastE0 - is there such a method?

 

Thanks,

Paul

 

 

 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/