[c-nsp] 2851 and full BGP

[Jay Nakamura]

I have two 2851s connected to each other over gigabit Ethernet WAN.

Both have 1GB RAM and running 12.4(20)T advanced IP services.

Both routers are connected to our providers with full BGP feed.  That part
works fine.

When I have the two 2851 try to send it's full route to each other, it gets
to about 20,000 routes and the session resets.  Here is a debug output

Aug  8 09:48:30.099: BGP: x.x.x.x bad message length - 4097
Aug  8 09:48:30.099: BGP: x.x.x.x went from Established to Closing

Any ideas on what could be causing this issue?  Is there a better IOS
version to use?

Thanks in advance.