[c-nsp] Good 10GE Metro switch

Alex Burba alex.burba at gmail.com
Mon Aug 11 17:35:14 EDT 2008


It will do fine until you won't try to upload full view or try to serve more
then 10-15 downlinks, i suppose.

2008/8/12 Joe Loiacono <jloiacon at csc.com>

> We have a requirement for about 2+ GE between two metro locations. I'm
> looking at the 3750-E with 2 X2 10GE uplink ports. I would use the
> 10GBASE-ER X2 Transceiver Module for the distance. Actually the distance
> is about at the 40 Km limit - but that's another question. Want to do BGP
> with a limited set of users at the remote location.
>
> Assuming the distance is OK, does this switch make sense? Recommend
> another?
>
> Thanks,
>
> Joe
>
> PS - Should I worry (alot) about being at or slightly above the 40 Km
> distance?
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list