[c-nsp] ME6500

[Rubens Kuhl Jr.]

On Tue, Aug 12, 2008 at 8:28 AM, Adrian M <adrian.minta at gmail.com> wrote:
> Hello,
> I have a cisco ME-C6524GT-8S with software
> s6523-advipservicesk9-mz.122-18.ZU2 and I don't know how to do some
> basic things like:
>
> How to clear an arp entry
> "clear ip arp 10.10.10.10" doesn't work :(

On some platforms, "conf t" +"no arp a.b.c.d" can do this, but I
haven't tried it on ME6524. Is "clear arp interface <xxx>" where <xxx>
is the interface where the arp entry is located won't probably be that
hard, unlesss you have thousand of entries on that routed or SVI
interface.


> How to display mac learned on a routed subinterface
> "sh mac-address-table" don't display mac addresses for ports like Gi1/10.200

I don`t think routed subinterfaces have mac-address-table, by
definition... ping <broadcast address of Gi1/10.200> (use both
all-zeros and all-ones broadcasts) followed by show ip arp gi1/10.200
will likely show whoever is attached to that interface (even for hosts
that don't answer ping, because it's not common to filter out arp
requests/responses in host firewalls these days).


Rubens