[c-nsp] CLIPS functionality for DHCP clients

[Rubens Kuhl Jr.]

I don't think there is any Cisco low-end solution to this; 7200, ASR,
10k and SCE are the platforms I think can do this one way or the
other.

Consider using Mikrotik or NoCat/NoDog solutions (http://nocat.net/).


Rubens



On Wed, Aug 13, 2008 at 5:23 PM, Kyle Johnson <vateatea at gmail.com> wrote:
> All-
>
> I'm trying to create a solution to allow for subscriber management
> based on client PC MAC address. I see that Redback offers this "CLIPS"
> (CPE mac address & RADIUS record) method of subscriber management but
> Redback equipment is pretty pricey...
>
> Does anyone have a suggestion on a Cisco equivalent (PPPOE
> functionality/sessions based off client MAC rather than PPPOE
> config..) that will run on lower-end gear?
>
> Thanks-
>
> Kyle
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>