[c-nsp] ip cef load sharing

[Dan Letkeman]

ip load-sharing per-packet

I tried adding this to F0/1 and the trace route works now(it randomly
picks either line), but there seems to be issues with maybe the MTU?
If I try to browse websites i get page errors and some of the pictures
and pages don't load.

Any ideas?

Thanks,
Dan.

On Fri, Aug 15, 2008 at 12:12 PM, Rodney Dunn <rodunn at cisco.com> wrote:
> Try ip load-sharing per-packet on both egress interfaces.
>
> On Fri, Aug 15, 2008 at 12:00:46PM -0500, Dan Letkeman wrote:
>> Hello,
>>
>> I have a 2621 router running 12.3(26) and I would like to setup load
>> sharing to multiple adsl lines.  When I do a traceroute on the router
>> it randomly picks a dsl line and seems to work fine.  But when I do
>> traceroute tests from a workstation it always seems to take the same
>> adsl line.  Is there something else I need to add to the configuration
>> to make it pick random lines, or is there a timeout of some sorts
>> before it will select the next ip route
>>
>> Here is my config:
>>
>> !
>> interface FastEthernet0/0
>>  ip address 10.1.10.1 255.255.255.0
>>  duplex auto
>>  speed auto
>> !
>> interface FastEthernet0/1
>>  ip address 192.168.10.1 255.255.255.0
>>  duplex auto
>>  speed auto
>> !
>> ip http server
>> ip classless
>> ip route 0.0.0.0 0.0.0.0 192.168.10.10
>> ip route 0.0.0.0 0.0.0.0 192.168.10.11
>> !
>>
>> The two adsl modem/routers I have are 192.168.10.10, and 192.168.10.11
>>
>> Thanks,
>> Dan.
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>