[c-nsp] %IPC-SP-5-WATERMARK:
Adam Korab
adam.korab at gmail.com
Mon Aug 18 12:46:47 EDT 2008
Hi,
Just finished reading the thread from 2002 between Steiner, Alex
Rubenstein, and Chris Johns. I'm currently dealing with what I think
is the same issue, but running newer code than what Steinar
recommended - 122-19.SXD7 to be precise.
This issue prevents 'sh run' from executing, but otherwise traffic
appears to be passing just fine. It's happening on 2 6509s, both with
WS-X6K-SUP2-2GE installed.
One question, given that it's a remote environment: will the boxes
reload properly? The bit about the MSFC locking makes me nervous.
What code is currently recommended for 6509/sup2? Any workarounds
available in the meantime? Customer AFAIK doesn't have Smartnet....
Relevant bits:
2y8w: %IPC-SP-5-WATERMARK: 1320 messages pending in rcv for the port
Card1/1:Request(10000.5) seat 10000
2y8w: %IPC-SP-5-WATERMARK: 1320 messages pending in rcv for the port
Card1/1:Request(10000.5) seat 10000
2y8w: %IPC-SP-5-WATERMARK: 1320 messages pending in rcv for the port
Card1/1:Request(10000.5) seat 10000
2y8w: %IPC-SP-5-WATERMARK: 1320 messages pending in rcv for the port
Card1/1:Request(10000.5) seat 10000
2y8w: %IPC-SP-5-WATERMARK: 1320 messages pending in rcv for the port
Card1/1:Request(10000.5) seat 10000
2y8w: %ICC-SP-5-WATERMARK: 1355 pkts for class L2-AGING are waiting to
be processed
----------
edge0#sh ipc que
There are 0 IPC messages waiting for acknowledgement in the transmit queue.
There are 0 IPC messages waiting for a response.
There are 0 IPC messages waiting for additional fragments.
There are 0 IPC messages currently on the IPC inboundQ.
There are 0 IPC messages currently on the zone inboundQ.
Messages currently in use : 50
Message cache size : 6000
Maximum message cache usage : 6000
0 times message cache crossed 12000 [max]
There are 9 messages currently reserved for reply msg.
-------
edge0#sh ipc stat
IPC System Status
Time last IPC stat cleared : never
This processor is an IPC slave server.
Do not drop output of IPC frames for test purposes.
6000 IPC Message Headers Cached.
Rx Side Tx Side
Total Frames 626763425
234165644 0 0
Total from Local Ports 1065511881 158268780
Total Protocol Control Frames 45199040 37948411
Total Frames Dropped 0 0
Service Usage
Total via Unreliable Connection-Less Service 543615974 33935400
Total via Unreliable Sequenced Connection-Less Svc 0 0
Total via Reliable Connection-Oriented Service 37948411 45198990
IPC Protocol Version 0
Total Acknowledgements 45199040 37948411
Total Negative Acknowledgements 0 0
Device Drivers
Total via Local Driver 0 0
Total via Platform Driver 626763425 117082850
Total Frames Dropped by Platform Drivers 0 0
Total Frames Sent when media is quiesced 0
Reliable Tx Statistics
Device Drivers
Total via Local Driver 0 0
Total via Platform Driver 626763425 117082850
Total Frames Dropped by Platform Drivers 0 0
Total Frames Sent when media is quiesced 0
Reliable Tx Statistics
Re-Transmission 0
Re-Tx Timeout 3652
Rx Errors Tx Errors
Unsupp IPC Proto Version 0 Tx Session Error 0
Corrupt Frame 0 Tx Seat Error 0
Duplicate Frame 0 Destination Unreachable 0
Out-of-Sequence Frame 0 Tx Test Drop 0
Dest Port does Not Exist 0 Tx Driver Failed 0
Rx IPC Msg Alloc Failed 0 Ctrl Frm Alloc Failed 0
Unable to Deliver Msg 0 Invalid Messages 0
Buffer Errors Misc Errors
IPC Msg Alloc 0 IPC Open Port 18563
Emer IPC Msg Alloc 0 No HWQ 0
IPC Frame PakType Alloc 0 Hardware Error 0
IPC Frame MemD Alloc 0
Tx Driver Errors
No Transport 0
MTU Failure 0
Dest does not Exist 0
Thanks!
--Adam
More information about the cisco-nsp
mailing list