[c-nsp] Cisco ACE Context

[Teller, Robert]

I have two cisco 6509 chassis with ace and fwsm modules. I have
configured the ace blades to use an internal and external conext. On
ACE-A I am able to bring up both contexts and everything talks just fine
but on ACE-B I can't bring up vlan 138. Is there something I'm missing?

 

------------------------------------------------------------------------
-----------------------------------------

svclc autostate

svclc multiple-vlan-interfaces

svclc module 7 vlan-group 9706,

firewall autostate

firewall multiple-vlan-interfaces

firewall module 3 vlan-group 9706,

firewall vlan-group 9706
100,120,138,150,190,200,210,235,238,555,575,801-804

firewall vlan-group 9706  999

------------------------------------------------------------------------
-----------------------------------------

 

ADMIN Context

------------------------------------------------------------------------
-----------------------------------------

ft interface vlan 801

  ip address XXX.XXX.XXX.145 255.255.255.252

  peer ip address XXX.XXX.XXX.146 255.255.255.252

  no shutdown

 

ft peer 1

  heartbeat interval 300

  heartbeat count 20

  ft-interface vlan 801

ft group 1

  peer 1

  priority 200

  associate-context Admin

  inservice

 

context WDS-External

  allocate-interface vlan 138

context WDS-Internal

  allocate-interface vlan 238

 

ft group 2

  peer 1

  priority 200

  associate-context WDS-Internal

  inservice

ft group 3

  peer 1

  priority 200

  associate-context WDS-External

  inservice

------------------------------------------------------------------------
-----------------------------------------

 

context WDS-External

------------------------------------------------------------------------
-----------------------------------------

interface vlan 138

  ip address XXX.XXX.XXX.150 255.255.255.192

  alias XXX.XXX.XXX.188 255.255.255.192

  peer ip address XXX.XXX.XXX.189 255.255.255.192

  access-group input any

  service-policy input REMOTE_MGMT_ALLOW_POLICY

  no shutdown

 

vlan138 is down, VLAN not assigned from the supervisor

  Hardware type is VLAN

  MAC address is 00:1f:6c:89:0c:33

  Mode : routed

  IP address is XXX.XXX.XXX.150 netmask is 255.255.255.192

  FT status is standby

  Description:not set

  MTU: 1500 bytes

  Last cleared: never

  Alias IP address is XXX.XXX.XXX.188 netmask is 255.255.255.192

  Peer IP address is XXX.XXX.XXX.189 Peer IP netmask is 255.255.255.192

  Not assigned from the Supervisor, down on Supervisor

  Service-policy download failures : 3

     0 unicast packets input, 0 bytes

     0 multicast, 0 broadcast

     0 input errors, 0 unknown, 0 ignored, 0 unicast RPF drops

     0 unicast packets output, 0 bytes

     0 multicast, 0 broadcast

     0 output errors, 0 ignored

------------------------------------------------------------------------
-----------------------------------------

 

Robert Teller
Washington Dental Service
Network Administrator 
(206) 528-2371
RTeller at DeltaDentalWa.com <mailto:RTeller at DeltaDentalWa.com> 

 


#########################################################
The information contained in this e-mail and subsequent attachments may be privileged, 
confidential and protected from disclosure.  This transmission is intended for the sole 
use of the individual and entity to whom it is addressed.  If you are not the intended 
recipient, any dissemination, distribution or copying is strictly prohibited.  If you 
think that you have received this message in error, please e-mail the sender at the above 
e-mail address.
#########################################################