[c-nsp] Interesting 7206 behavior

[Arie Vayner (avayner)]

Ryan,

It seems QOS support on multilink ports was disabled in 12.0(28)S due to
some major issues between the LFI and QOS code.
The support is there in newer software, specifically the 12.2SB. I
suggest you try using 12.2(31)SB.

I think this link could help:
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/mcmlp.html

Thanks
Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Ryan Lambert
Sent: Saturday, August 23, 2008 05:02 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Interesting 7206 behavior

Running a 7206XVR with NPE-300. Code 12.0(28)S6. 

 

For what it's worth, the two T1s land on a PA-MC-2T3+.

 

Anyone seen anything similar to this before? I took a quick peek on
Cisco's site for anything relevant, but I didn't come up with much. As
per usual, browsing the list of bugs managed to freak me out, but I
didn't see exactly what I was looking for. 

 

router(config-if)#int mu16

router(config-if)#service-policy output Customer_QoS-Colo 

 Service policies on multilink interfaces are not supported

 

router(config-if)#int ser5/1/25:0

router(config-if)#service-policy output Customer_QoS-Colo 

 Serial5/1/25:0 is a member of a multilink/mfr bundle.

 Please attach the service-policy to the multilink/mfr interface
instead.

 

I did sanitize some of this to take out router/customer names, but this
is the actual output, if you can believe that.

 

As a side note, this works if I rip one of the T1s out of the MLPPP
bundle and apply the policy to the individual serial interface. Does not
work
-ever- on the Multilink interface, or on an interface part of a
multilink group. 

 

Thanks,

-Ryan

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/