[c-nsp] EoMPLS with Port-channel with 8GE interfaces.

[Maarten Moerman]

On 8/25/08 4:07 PM, "Oliver Boehmer (oboehmer)" <oboehmer at cisco.com> wrote:

> 
> I've never done xconnect on a port-channel, but you could remove the
> channel on r1 and r2 and just configure "regular" EoMPLS PWs between
> each of the four GigE links. Channeling is then only performed on sw1
> and sw2.. I would consider running LACP/PaGP on the channel between
> sw1/sw2..
> This should work.

Never did think of that possibility, thanks, will look into that.

I think the current not working scenario is because everything is
encapsulated in a trunk, so the routers cannot see how they need to load
balance it.

Maarten