[c-nsp] VTP and Vlan 1

[Michel Grossenbacher]

Hi Mike
Actually VLAN 1 is not pruning-eligible so you can not prune VLAN 1 from a
trunk. However you can remove it from the trunk.
If you remove it from the trunk and change the native VLAN for the trunk,
VTP will then use the new native VLAN for updates.
best regards

Michel


On 25/08/2008, Mike Louis <MLouis at nwnit.com> wrote:
>
> List,
>
> I just read in a practice test for an upcoming cert that Vlan 1 is used to
> carry VTP advertisements. However, it is possible to prune vlan 1 from trunk
> links. Will VTP continue to function without Vlan 1 being enabled on the
> link? Has this changed in more recent IOS releases?
>
> Note: This message and any attachments is intended solely for the use of
> the individual or entity to which it is addressed and may contain
> information that is non-public, proprietary, legally privileged,
> confidential, and/or exempt from disclosure.  If you are not the intended
> recipient, you are hereby notified that any use, dissemination,
> distribution, or copying of this communication is strictly prohibited.  If
> you have received this communication in error, please notify the original
> sender immediately by telephone or return email and destroy or delete this
> message along with any attachments immediately.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>