[c-nsp] LLQ + MLPPPoE -> ?

[David Freedman]

>Remove the service policy from your ATM int's and just leave it on your
>Dialer, then do a "sh users" and you should see an interface listed as the
>MLP Bundle, this is the one you want to be watching, if for example it is
>Vi4 then do a "sh policy-map int vi4"

I was following the advice at http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a0080094ad2.shtml
which states:

". When you use a combination of Class-based Marking or Class- based Policing and Class-based Queuing, the order of operations is this:

   1.

      The service-policy command configured on the Virtual-Template interface marks or polices the packets.
   2.

      The service-policy command on the ATM PVC queues the packets
"

Is this not correct? 



------------------------------------------------
David Freedman
Group Network Engineering 
Claranet Limited
http://www.clara.net