[c-nsp] Few questions regarding fixed vs modular and when which isbetter.

[Arie Vayner (avayner)]

Some pointers you might find interesting:
http://www.cisco.com/en/US/solutions/ns708/networking_solutions_products
_genericcontent0900aecd806fd331.pdf
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns107/c649/ccmig
ration_09186a008073377d.pdf

Arie 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Drew Weaver
Sent: Thursday, August 28, 2008 16:52 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Few questions regarding fixed vs modular and when which
isbetter.

        What is the 'defacto' top of rack 10/100/1000 48 port access
switch most folks are buying up these days from the big C?

        Does anyone recommend any lower cost 10/100/1000 switches from
other vendors that 'work just fine' for this limited purpose?

        These 48 port switches would just be used to connect machines to
VLANs (over uplink/trunks) which are on the distribution/core layer.

      If you have the right server/client density does it ever make
sense to use a 6513 for the l2 connectivity or is it always better to
use sep. switches?

      It seems like using 11 sep. switches would add a lot of management
headaches over just having a redundant 6500 (pwr/sup) does anyone have
any opinions/advice on this point?

       Thanks!

       -Drew
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/