[c-nsp] FWSM module replacement

Justin M. Streiner streiner at cluebyfour.org
Fri Aug 29 17:25:39 EDT 2008


On Fri, 29 Aug 2008, Velasquez Venegas Jaime Omar wrote:

> Always it's handy to have a backup of all your current configuration
> files (i.e system config and all of the other contexts).If something
> unexpected comes up it's fairly easy to replace a blank configuration
> file.

That, and also make sure that the replacement blade is licensed for the 
same number of contexts as the original one.

jms

> -----Mensaje original-----
> De: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] En nombre de Ge Moua
> Enviado el: Friday, August 29, 2008 8:27 AM
> Para: 'Brett Clausenhauf'; cisco-nsp at puck.nether.net
> Asunto: Re: [c-nsp] FWSM module replacement
>
> Be careful here (as I've made this mistake already):
> * Set the good fwsm to 'primary - active'
> * before you bring up the fail-over link, set the replacement to
> 'secondary
> - standby'
> * as soon as you bring up the fail-over link the sync happens
> automatically
> * you can changet to unit desgination after this
> * be carefule not to bring the replacement unit online in 'primary -
> active', otherwise the a blank config will be syced between them (this
> is bad, & I've done this before).
>
> Good luck.
>
> Regards,
> Ge Moua | Email: moua0100 at umn.edu
>
> Network Design Engineer
> University of Minnesota | Networking & Telecommunications Services
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Brett
> Clausenhauf
> Sent: Friday, August 29, 2008 3:37 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] FWSM module replacement
>
> Hi Guys,
>
>
> Shortly I need to replace a FWSM module in a 6500. It is paired with
> another FWSM module which is now the active module.
>
> Looking at this below url it seems to be a straight forward process to
> replace the module & to get the configuration sync'ed.
>
> http://www.cisco.com/en/US/docs/security/fwsm/fwsm22/configuration/guide
> /upg
> rade.html#wp1036343
>
>
> One thing is not clear though. The module that died is usually the
> primary module, whilst the current active module is in standby..  If I
> issue the command "Failover" in step 5 after I define the replacement
> module with all the basic failover variables including the unique
> variable of  *fail lan unit Primary will this cause it to override the
> configuration in the
> currently active FWSM with that of the newly installed FWSM?   I presume
> not, although I am not 100 percent sure here.*
> **
>
> Regards,
>
> Brad
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list