[c-nsp] SNMP access to err-disable on 2960s

[John Jensen]

Have you tried looking at the CISCO-ERR-DISABLE-MIB file?

You can download it here:

ftp://ftp-sj.cisco.com/pub/mibs/v2/CISCO-ERR-DISABLE-MIB.my

HTH

-JJ

On Fri, Aug 29, 2008 at 7:02 AM, Ross Vandegrift <ross at kallisti.us> wrote:
> Hi everyone,
>
> Trying to find a way to access the err-disable status of a port via
> SNMP.  The only way I've found to do that is to get
> CISCO-STACK-MIB::portAdditionalOperStatus.
>
> Unfortunately, the 2960s don't have anything at this OID, even though
> they support a bunch of other stuff from the stack mib.  For that
> matter, neither our 6500s nor 3750s have this value either.
>
> An interface in err-disable has ifAdminStat up, ifOperStat down,
> and CISCO-STACK-MIB::portOperStatus other - it seems indistinguishable
> from a link that is just down/down.
>
> Has anyone found any clever set of things that indicate an err-disable
> Catalyst interface that can be fetched via SNMP?
>
> --
> Ross Vandegrift
> ross at kallisti.us
>
> "The good Christian should beware of mathematicians, and all those who
> make empty prophecies. The danger already exists that the mathematicians
> have made a covenant with the devil to darken the spirit and to confine
> man in the bonds of Hell."
>        --St. Augustine, De Genesi ad Litteram, Book II, xviii, 37
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>