[c-nsp] System MTU on 4948

[chloe K]

Just wandering why it needs to reboot after changing the mtu
   
  Even linux, it just uses the command "ifconfig eth0 mtu 9000"
   
  The cisco should be better than linux
   
  Thank you
   
   
  

"Sergio D." <sdanelli at gmail.com> wrote:
  Thanks.

On Fri, Dec 5, 2008 at 3:59 PM, Marko Milivojevic wrote:

> On Fri, Dec 5, 2008 at 21:31, Sergio D. wrote:
> > Hello,
> > Does anyone know if a reload is needed after setting the system mtu on a
> > 4948 running cat4500-ipbase-mz.122-31.SGA4.bin?
>
> I am not 100% sure about the exact IOS, but I don't remember having to
> reload 4948's for the system MTU change.
>
> --
> Marko
> CCIE #18427 (SP)
> My network blog: http://cisco.markom.info/
>



-- 
Sergio Danelli
JNCIE #170
_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


       
---------------------------------
Now with a new friend-happy design! Try the new Yahoo! Canada Messenger