[c-nsp] Utilization of a line card (7606)

[Roddy Strachan]

Thanks

Doesn't seem to work though

#remote command module 2 sh proc cpu
Cannot remote to module 2


Do i need to enable something in the config?


-----Original Message-----
From: E. Versaevel [mailto:erik at infopact.nl] 
Sent: Wednesday, 10 December 2008 7:46 PM
To: Roddy Strachan
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Utilization of a line card (7606)

Hi Roddy,

router#remote command module 1 show proc cpu sort

CPU utilization for five seconds: 4%/0%; one minute: 4%; five minutes:
4%
 PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process
 121   163451056 328079970        498  4.39%  4.32%  4.33%   0 fw_lcp
process
   2         824    750462          1  0.00%  0.00%  0.00%   0 Load
Meter

(although this is a WS-X6724-SFP)

Kind regards,

Erik Versaevel


ps, any idea what the fw_lcp process is?



Roddy Strachan schreef:
> Hey guys,
> 
>  
> 
> Hoping someone can help.
> 
>  
> 
> Is there any command to check the utilisation of a specific card
within
> a 7606?
> 
>  
> 
> Or lets be more specific, I suspect a line card in the router is
> overloaded and causing the CPU to spike, is there any way to find out
> how much utilisation that card is using to check to see if we are over
> subscribing it or not ?
> 
>  
> 
> The card model in question is a WS-X6148A-GE-TX which I believe has no
> dedicated packet processor like a SIP-400/SPA so therefore it punts
> everything to the CPU.
> 
>  
> 
>  
> 
> Thanks
> 
>  
> 
> 
> This email and any files transmitted with it are confidential and
intended
>  solely for the use of the individual or entity to whom they are
addressed. 
> Please notify the sender immediately by email if you have received
this 
> email by mistake and delete this email from your system. Please note
that
>  any views or opinions presented in this email are solely those of the
>  author and do not necessarily represent those of the organisation. 
> Finally, the recipient should check this email and any attachments for

> the presence of viruses. The organisation accepts no liability for any

> damage caused by any virus transmitted by this email.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



Erik Versaevel

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.176 / Virus Database: 270.9.16/1840 - Release Date:
9/12/2008 4:53 PM