[c-nsp] Rate limiting but on packet count not bandwidth

[Luan Nguyen]

Maybe give storm-control with pps keyword a try.
http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/1
2.2_25_see/configuration/guide/swtrafc.html#wp1241484

Regards,

Luan Nguyen
Chesapeake NetCraftsmen, LLC.
www.NetCraftsmen.net


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Primoz Jeroncic
Sent: Wednesday, December 17, 2008 10:01 AM
To: Cisco Mailing list
Subject: [c-nsp] Rate limiting but on packet count not bandwidth

Hi guys

Does anyone have any idea if rate limiting traffic based on packet
count would be possible on Cat3550/3560/3570 or any Cisco router?
I would need to limit some users which don't generate much of
traffic (only about 5 or 6Mbps), but packet count is huge (30k+ per sec).

So is there some option to limit their fraffic to let's say 5000packets/sec
regardless on bandwidth they use?

Thanks for help.

Have fun,
Primoz Jeroncic
Support - IP Connectivity & Routing
-------------------------------------------------------------------
Softnet d.o.o.  tel:  +386 1 562 31 40   |
Borovec 2       fax:  +386 1 562 18 55   |       1 + 1 = 3
1236 Trzin      primoz(at)softnet.si     | for larger values of 1
Slovenija       http://flea.softnet.si/
-------------------------------------------------------------------

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/