[c-nsp] npe-g2 CsCsk65796

[Rodney Dunn]

On Fri, Dec 19, 2008 at 10:17:48AM -0500, Rodney Dunn wrote:
> Eugene,
> 
> I did a little digging on this and it appears there are a couple
> of gotchas with this one.
> 
> a) Does the boot image you have have the fix for it?
> dir bootflash:
> 
> If not, we need to get one that does.
> 
> b) What code did you upgrade from? From talking with DE, unlcear
>    exactly what in the code it is, but just upgrading to the image
>    with the fix may not resolve it as the problem was carried over.
>    Can you reload it once more on the upgraded image and verify if it
>    comes back?

I'm asking for more clarification but I think they are implying a hard
power cycle not a remote "reload" via the CLI.


> 
> Rodney
> 
> 
> gotOn Sat, Dec 06, 2008 at 08:09:38AM -0500, Rodney Dunn wrote:
> > Eugene,
> > 
> > Can you post a 'sh int' and 'sh controller' for the interface?
> > 
> > And 'sh ver' from the box?
> > 
> > Rodney
> > 
> > On Sat, Dec 06, 2008 at 12:29:29PM +0200, Eugene Vedistchev wrote:
> > > I wonder if someone else upgraded to 12.2SB train to fix CSCsk65796  ?
> > > Bug Details  NPE-G2: all rx frames counted as overruns on built-in gige.
> > > 
> > > We have upgraded software to 12.2.31SB13 on two routers, reloaded them 
> > > and stuck with this
> > > bug again.
> > > Bug Toolkit provided workaround to powercycle routers.
> > > I cannot justify for me, do powercycle with new software get rid this 
> > > bug for us, or we encounter another bug or physical failure ?
> > > 
> > > Eugene Vedistchev
> > > 
> > > _______________________________________________
> > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/