[c-nsp] Active Supervisor on 6500 - SNMP?

[Matlock, Kenneth L]

Ahh, there we go!

Kept looking for 'redundancy' 'failover' 'active' 'hot' 'cold', but
never thought about 'RF' as an abbreviation! 

Thanks for the help!

Ken Matlock
Network Analyst
Exempla Healthcare
(303) 467-4671
matlockk at exempla.org
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Brandon Ewing
Sent: Friday, December 26, 2008 1:19 PM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Active Supervisor on 6500 - SNMP?

On Fri, Dec 26, 2008 at 11:08:20AM -0700, Matlock, Kenneth L wrote:
> 
> Is there an SNMP MIB to tell me which supervisor in a cat6500-series
> chassis is currently the active, and what state (hot/cold/etc) the
> standby supervisor is in?
> 
>  

CISCO-RF-MIB
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/SSO_MIBS.html#wp
1035478

snmpwalk -v 2c -c public 6500_vss_test  1.3.6.1.4.1.9.9.176
CISCO-RF-MIB::cRFStatusUnitId.0 = INTEGER: 21
CISCO-RF-MIB::cRFStatusUnitState.0 = INTEGER: active(14)
CISCO-RF-MIB::cRFStatusPeerUnitId.0 = INTEGER: 37
CISCO-RF-MIB::cRFStatusPeerUnitState.0 = INTEGER: standbyHot(9)
CISCO-RF-MIB::cRFStatusPrimaryMode.0 = INTEGER: true(1)
CISCO-RF-MIB::cRFStatusDuplexMode.0 = INTEGER: true(1)
CISCO-RF-MIB::cRFStatusManualSwactInhibit.0 = INTEGER: false(2)
CISCO-RF-MIB::cRFStatusLastSwactReasonCode.0 = INTEGER: userInitiated(4)
....
CISCO-RF-MIB::cRFCfgRedundancyMode.0 = INTEGER: hotStandbyRedundant(8)
CISCO-RF-MIB::cRFCfgRedundancyModeDescr.0 = STRING: SSO (Stateful
Switchover)

-- 
Brandon Ewing
(nicotine at warningg.com)