[c-nsp] bridging two eth for ip flow

[Prabhu Gurumurthy]

Dan Letkeman wrote:
> Hello,
> 
> I have a 2621 lying around that I would like to use as a transparent
> bridge and enable ip flow exports on.
> 
> So the basic idea is to bridge the two ethernet interfaces, then put
> the device inline with a network.
> 
> Can this be done?
> 
> Thanks,
> Dan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 

I think this can be done using BVI interface if my memory serves right. I had to 
configure a 2800 series router for the same, too bad I dont have the configs.

Hope this helps!
Prabhu
-