[c-nsp] BFD aware VRF

[Luan Nguyen]

I have bgp running between PE and CE.
So on the PE, you do:
router bgp xxxx
address-family ipv4 vrf whatever
neighbor y.y.y.y fall-over bfd
Do the same for the CE under bgp.
Then on the link between CE and PE, configured the bfd interval...etc.  That
should work.

The problem is my CE is a 1841 with a Channelized T1/PRI port and even with
the latest 12.4.15T3, i can't put the bfd command under the serial
interface!  Without interface level bfd command, bfd won't work.  Hello?
I did try with an ethernet link between PE and CE, and bfd config looks
good.

-lmn


On Feb 4, 2008 11:47 AM, Vikas Sharma <vikassharmas at gmail.com> wrote:

> Hi,
>
> Anyone have configured VRF aware BFD? If yes pls let me know how?
>
> Regards
> Vikas Sharma
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>