[c-nsp] Cisco 4500 not showing all the log detail?

[Matlock, Kenneth L]

Make sure on the interfaces you want to monitor, you have

'logging event link-status'

Ken Matlock
Network Analyst
(303) 467-4671
matlockk at exempla.org

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of William
Sent: Monday, February 04, 2008 10:32 AM
To: [c-nsp]
Subject: [c-nsp] Cisco 4500 not showing all the log detail?

Hi,

I have a Cisco 4500 running 12.1 IOS code.

It would seem we are not getting up/down port events in the log
buffer, to setup logging we have:

logging source-interface Vlan1
logging 192.168.1.1

we did set the logging buffer to informational (this doesnt show in
show run for some reason?), this is confirmed in 'sh logging' but we
aren't seeing the information we would expect!

Is there something I've missed? I am getting messages on counters
being cleared and configuration from console but that seems to be it.

Cheers,

W
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/