[c-nsp] Cisco 4500 not showing all the log detail?

[koen]

Hi William,

Did you configure something like "logging buffered 40960 debugging" ?
You're nou logging towards a syslog server.

Koen

William wrote:
> Hi,
> 
> I have a Cisco 4500 running 12.1 IOS code.
> 
> It would seem we are not getting up/down port events in the log
> buffer, to setup logging we have:
> 
> logging source-interface Vlan1
> logging 192.168.1.1
> 
> we did set the logging buffer to informational (this doesnt show in
> show run for some reason?), this is confirmed in 'sh logging' but we
> aren't seeing the information we would expect!
> 
> Is there something I've missed? I am getting messages on counters
> being cleared and configuration from console but that seems to be it.
> 
> Cheers,
> 
> W
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>