[c-nsp] dead WIC-1ADSL?

Ben Steele ben at internode.com.au
Mon Feb 4 20:03:25 EST 2008


You can install your WIC into slot 1-3, slot 0 is the only one  
reserved for VIC only, slot 2 is VIC or WIC and 1/3 are HWIC and  
backwards compatible with WIC.

Ben

On 05/02/2008, at 9:53 AM, Tom Storey wrote:

>> Hi,
>>
>> I just got a WIC-1ADSL and put it into my 2801 (IOS 12.4(16)). No  
>> lights,
>> no logs, no nothing. I understand these cards are supported on the  
>> 2801.
>> The part number of the WIC is 73-477108 B0.
>>
>> Is anyone aware of compatibility issues with these cards? Maybe  
>> it's just
>> a bad card (or a bad slot).
>>
>> Thanks,
>> Adam
>>
>
> Did you install it into a VIC/VWIC or HWIC only slot?
>
> I believe there are two HWIC only slots, one VIC only slot, and one  
> slot
> that can accept regular WICs.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list