[c-nsp] pix question

[Jason Lixfeld]

Can you be a little more clear on what "I can't do that" means?  Can  
you not login to the standby?  Can you not run a show ver on the  
standby?  Is your failover working?  What does show failover show when  
you run that on the active PIX?

On 6-Feb-08, at 11:05 AM, ultramajestic wrote:

> For some reason, I can't do that, it is strange :-/
>
> El mié, 06-02-2008 a las 08:25 -0500, Jason Lixfeld escribió:
>> You can just log in to it (the passive/standby node) directly and  
>> do a
>> show ver.
>>
>> On 6-Feb-08, at 8:15 AM, ultramajestic wrote:
>>
>>> Hi, is there anyway to see the serial number of a pix when it is
>>> running
>>> as the passive node?
>>>
>>>
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>