[c-nsp] EtherChannel support on Onboard Gigabit Ethernet ports of 3800 series?

[Łukasz Bromirski]

Robert Hass wrote:
> 2008/2/21 Łukasz Bromirski <lukasz at bromirski.net>:
>>  Yeah, the docs will need to be updated, and it's taken care of. From
>>  12.4(18) (or more technically - from 12.4(17.4)), the built in
>>  interfaces, as well as NM-1GE, HWIC-1GE, HWIC-1FE and HWIC-2FE will
>>  support EtherChannel correctly. Previously, it could be configured,
>>  but usually didn't work.
> 
> Łukasz, is EtherChannel also work on build in interfaces for latest 12.4T
> images ? I mostly mean 12.4(15)T, which we're currently using.

I believe 12.4(17.6) should be integrated somewhere during 12.4(11)T,
but I'm not sure - Rodney may have a check on this.

> What about support for EtherChannel based on build-in FE/GE interfaces on
> ISR 2800 (2801/2811/2822) ? Is it work as well ?

It's for 2811/2821/2851/3825/3845 only, according to this whitepaper:
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_white_paper0900aecd806f698a.pdf

-- 
"Don't expect me to cry for all the     |               Łukasz Bromirski
  reasons you had to die" -- Kurt Cobain |    http://lukasz.bromirski.net