[c-nsp] Strange PIX interface problem
William
willay at gmail.com
Mon Feb 25 07:49:36 EST 2008
try 'interface ethernet1 auto' or 'no interface ethernet1 auto shutdown'
You can see in the configuration that its currently in shutdown mode.
Regards,
W
On 25/02/2008, Peter Nyamukusa <petern at africaonline.co.tz> wrote:
> Here it is below
> I have only put the Ip as I am trying to login to the PDM
>
> :
> PIX Version 6.3(3)
> interface ethernet0 auto shutdown
> interface ethernet1 auto shutdown
> nameif ethernet0 outside security0
> nameif ethernet1 inside security100
> enable password 8Ry2YjIyt7RRXU24 encrypted
> passwd 2KFQnbNIdI.2KYOU encrypted
> hostname pixfirewall
> fixup protocol dns maximum-length 512
> fixup protocol ftp 21
> fixup protocol h323 h225 1720
> fixup protocol h323 ras 1718-1719
> fixup protocol http 80
> fixup protocol rsh 514
> fixup protocol rtsp 554
> fixup protocol sip 5060
> fixup protocol sip udp 5060
> fixup protocol skinny 2000
> fixup protocol smtp 25
> fixup protocol sqlnet 1521
> fixup protocol tftp 69
> names
> pager lines 24
> mtu outside 1500
> mtu inside 1500
> no ip address outside
> ip address inside 192.168.1.1 255.255.255.0
> ip audit info action alarm
> ip audit attack action alarm
> no failover
> failover timeout 0:00:00
> failover poll 15
> no failover ip address outside
> no failover ip address inside
> pdm history enable
> arp timeout 14400
> timeout xlate 3:00:00
> timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
> 1:00:00
> timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
> timeout uauth 0:05:00 absolute
> aaa-server TACACS+ protocol tacacs+
> aaa-server RADIUS protocol radius
> aaa-server LOCAL protocol local
> http server enable
> http 192.168.1.2 255.255.255.255 inside
> no snmp-server location
>
> no failover ip address inside
> pdm history enable
> arp timeout 14400
> timeout xlate 3:00:00
> timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
> 1:00:00
> timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
> timeout uauth 0:05:00 absolute
> aaa-server TACACS+ protocol tacacs+
> aaa-server RADIUS protocol radius
> aaa-server LOCAL protocol local
> http server enable
> http 192.168.1.2 255.255.255.255 inside
> no snmp-server location
> no snmp-server contact
> snmp-server community public
> no snmp-server enable traps
> floodguard enable
> telnet timeout 5
> ssh timeout 5
> console timeout 0
> terminal width 80
> Cryptochecksum:3412014cce8cca04731da9f09bf1fa32
> : end
>
>
>
>
> -----Original Message-----
> From: William [mailto:willay at gmail.com]
> Sent: Monday, February 25, 2008 3:39 PM
> To: Peter Nyamukusa
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Strange PIX interface problem
>
> Peter can you include a 'show run' ?
>
> On 25/02/2008, Peter Nyamukusa <petern at africaonline.co.tz> wrote:
> >
> > Hi folks,
> >
> > I just reset a Pix 515E to factory default using the command "wr erase".
> > I am now trying to reconfigure it again and it looks like everything is
> > working fine except the interfaces I cannot seem to bring them up
> > When I type the command interface Ethernet 1 form the config prompt its
> > simply returns and does not change to PIX(config-if) there is also no
> error
> > deplayed. Just wondering if any one has come across this before or it
> could
> > just be a bug
> >
> > pixfirewall(config)# int e1
> > pixfirewall(config)# sh int e1
> > interface ethernet1 "inside" is administratively down, line protocol is
> down
> > Hardware is i82559 ethernet, address is 0012.7f5b.deee
> > IP address 192.168.1.1, subnet mask 255.255.255.0
> > MTU 1500 bytes, BW 10000 Kbit half duplex
> > 305 packets input, 27324 bytes, 0 no buffer
> > Received 305 broadcasts, 0 runts, 0 giants
> > 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> > 0 packets output, 0 bytes, 0 underruns
> > 0 output errors, 0 collisions, 0 interface resets
> > 0 babbles, 0 late collisions, 0 deferred
> > 0 lost carrier, 0 no carrier
> > input queue (curr/max blocks): hardware (128/128) software (0/0)
> > output queue (curr/max blocks): hardware (0/0) software (0/0)
> >
> > Cisco PIX Firewall Version 6.3(3)
> > Cisco PIX Device Manager Version 3.0(1)
> >
> > Compiled on Wed 13-Aug-03 13:55 by morlee
> >
> > pixfirewall up 2 hours 3 mins
> >
> > Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz
> > Flash E28F128J3 @ 0x300, 16MB
> > BIOS Flash AM29F400B @ 0xfffd8000, 32KB
> >
> > Encryption hardware device : Crypto5823 (revision 0x1)
> > 0: ethernet0: address is 0012.7f5b.deed, irq 10
> > 1: ethernet1: address is 0012.7f5b.deee, irq 11
> > Licensed Features:
> > Failover: Enabled
> > VPN-DES: Enabled
> > VPN-3DES-AES: Disabled
> > Maximum Physical Interfaces: 6
> > Maximum Interfaces: 10
> > Cut-through Proxy: Enabled
> > Guards: Enabled
> > URL-filtering: Enabled
> > Inside Hosts: Unlimited
> > Throughput: Unlimited
> > IKE peers: Unlimited
> >
> > This PIX has an Unrestricted (UR) license.
> >
> > Serial Number: 808440708 (0x302fd384)
> > Running Activation Key: 0x2fab0bdd 0x7a16e505 0xc2402929 0x96e856cd
> >
> >
> > Cheers Peter
> >
> >
> > _______________________________________________
> > cisco-nsp mailing list cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>
>
More information about the cisco-nsp
mailing list