[c-nsp] Can not Ping serial0/0/0

[Ali, Rijas: BB UAE (IT)]

Friends,
 
I just connected a Cisco 2811 se0/0/0 to a 128k Link Modem ( LL)  and
fed the point to point IP address and using default HDLC . Se0/0/0 is UP
line Protocol is UP.
 
I can not ping the local se0/0/0 from the Console and the remote WAN IP.
I have complete CDP information of the remote router.
 
I can ping from the LAN. Any clue?
 
ALI RIJAS


 


This e-mail and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this e-mail or its attachments.

Internet communications are not guaranteed to be secure or virus-free.
The Barclays Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any Internet communications by any third party, or from the transmission of any viruses. Replies to this e-mail may be monitored by the Barclays Group for operational or business reasons.

Any opinion or other information in this e-mail or its attachments that does not relate to the business of the Barclays Group is personal to the sender and is not given or endorsed by the Barclays Group.

Barclays Bank PLC.Registered in England and Wales (registered no. 1026167).
Registered Office: 1 Churchill Place, London, E14 5HP, United Kingdom.

Barclays Bank PLC is authorised and regulated by the Financial Services Authority.