[c-nsp] Application based rate limiting

[Ultra]

Try to use NBAR technology.
http://www.cisco.com/en/US/products/ps6616/products_ios_protocol_group_home.html

You only need to load the correct PDLMs into the flash and into the
configuration and the apply the correct QoS policies.

El jue, 03-01-2008 a las 17:11 +0800, Dracul escribió:
> Hi all,
> 
> Need advice from the QOS experts, is there a way in cisco to rate-limit
> based on applications? let's say for example I just want to limit all P2P
> traffic and let the rest flow normally.
> 
> thanks,
> chris
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/