[c-nsp] Memory requirements question

Bernd Ueberbacher noc at mynet.at
Thu Jan 3 17:06:37 EST 2008


Gert Doering schrieb:
> Hi,
>
> On Thu, Jan 03, 2008 at 04:56:27PM -0500, Paul Stewart wrote:
>   
>> I've gotten burned when you forget about the IOS uncompressing after an
>> upgrade and not having enough DRAM to run...;)
>>     
>
> That's certainly painful, yes :-)
>
> (Especially recovering from there, when you have a router that's too
> stupid for ROMMON TFTP and no ROMMON IOS either... 3640s were quite 
> annoying in this respect)
>
> gert
>   

While you mentioned that: I just remember that I already had the problem 
twice.... and once it
really was on a 3640 *GGG* It wasn't because of the amount of DRAM, but 
something else.
That day I learned that if a router doesn't have an onboard interface, 
you have to do it via the
console. This takes some time, and it even takes longer if while 
downloading, your notebooks
goes into standy-mode and you can start again ;-)


Greets,
Bernd



More information about the cisco-nsp mailing list