[c-nsp] Metro ethernet VCs are up but no packet transfer

[Vikas Sharma]

Hi,

In a metroethernet configuration, I have one side mst with 7600 (PE) and
another side 7200 (PE) with pvst. My VCs are up and mst and pvst has been
configured. But in the output below i can not see any packet send. any
clue??


PE2#sh mpls l2 vc 500 detail
Local interface: Gi0/1.500 up, line protocol up, Eth VLAN 500 up
  Destination address: 1.1.1.1, VC ID: 500, VC status: up
    Output interface: Gi0/3, imposed label stack {18 19}
    Preferred path: not configured
    Default path: active
    Next hop: 20.1.1.1
  Create time: 05:54:13, last status change time: 00:36:36
  Signaling protocol: LDP, peer 1.1.1.1:0 up
    MPLS VC labels: local 18, remote 19
    Group ID: local 0, remote 0
    MTU: local 1500, remote 1500
    Remote interface description: *** L2 connection to 7600 router ***
  Sequencing: receive disabled, send disabled
  VC statistics:
    packet totals: receive 29, send 0
    byte totals:   receive 2349, send 0
    packet drops:  receive 0, seq error 0, send 0

Regards
Vikas Sharma