[c-nsp] Bridge L2 network across WAN

[Andrew Gristina]

You can also look at QinQ tunneling.  But really that just extends the
pain.  It might be more worth your time to deal with the flat layer 2
network.

On Jan 8, 2008 5:47 PM, Geyer, Nick <nick.geyer at eds.com> wrote:
> Hi Everyone,
>
>
>
> I am hoping someone can help me out here. We have an old legacy network
> which is just a flat L2 network across multiple sites connected by
> fibre. For various reasons this fibre will no longer be available for
> use, so I need to find another way to keep this L2 network intact. There
> is a routed network between all the buildings, so I am hoping there is
> some sort of bridge scenario to carry this L2 traffic across.
>
>
>
> My plan at the moment was to connect these l2 switches at the sites into
> a 2811 at each site which in turn will be connected into the routed
> network. So basically I am after a way to bridge this l2 network across
> the 2811's/routed network.
>
>
>
> Any help would be extremely appreciated.
>
>
>
> Regards,
>
>
>
> Nikolas Geyer.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>