[c-nsp] 2960 not switching packets (hub-like behavior)

[Jeff Fitzwater]

It could be just UNKNOWN UNICAST packets.  Thats normal until the  
switch learns them on a specific interface.


Jeff Fitzwater
OIT Network Systems
Princeton University
On Jan 17, 2008, at 11:10 AM, Neils Christoffersen wrote:

> I have a WS-C2960-48TT-L running c2960-lanbasek9-mz.122-25.SEE4
>
> Sniffing traffic on a connected workstation, I can see unicast traffic
> destined for other systems connected to the switch. I know this  
> isn't normal
> behavior but I have been unable to diagnose the problem. Reloading  
> did not
> resolve it.
>
> This is a very simple configuration (single switch behind a  
> firewall, no
> vlans) and the network is not highly utilized.
>
> Suggestions?
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/