[c-nsp] BFD for static routes

[Arie Vayner (avayner)]

Justin,

You need to be aware that the CSCxxxxx "bugs" are not always considered
bugs. Even new features are documented internally in CSCxxxxx entries.
This is just a ticketing system the developers use.

I would suggest that you just ask you account team to contact the right
people in devel, and if enough people do it, they would make it a higher
priority to make it work.

Arie 

-----Original Message-----
From: Justin Shore [mailto:justin at justinshore.com] 
Sent: Friday, January 18, 2008 04:57 AM
To: Arie Vayner (avayner)
Cc: Phil Bedard; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] BFD for static routes

Arie,

Not to nit-pick here but it's not a bug.  It was a feature.  The feature
worked perfectly fine.  Then support for the working feature was
removed.  Intentionally taking away a feature isn't a bug in my opinion.

interface Vlan64
  bfd interval 50 min_rx 50 multiplier 3

When I ping my account team with this again is there anything in
particular that I need to pass along to them so that they can add our
input to the right internal discussion?

Thanks
  Justin


Arie Vayner (avayner) wrote:
> Phil,
> 
> Unfortunately, BFD on SVI is not currently supported...
> Take a look at:
> http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?meth
> od
> =fetchBugDetails&bugId=CSCsj08713
> 
> There are internal discussions to put it on the roadmap...
> If you really need it, I suggest you contact your Cisco account team, 
> and make them push.
> 
> Arie
> 
> -----Original Message-----
> From: Phil Bedard [mailto:philxor at gmail.com]
> Sent: Thursday, January 17, 2008 22:21 PM
> To: Arie Vayner (avayner)
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] BFD for static routes
> 
> Couple of days ago.
> 
> router#
> Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp- 
> IPSERVICES-M), Version 12.2(33)SRC, RELEASE SOFTWARE (fc3) Technical
> Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by 
> Cisco Systems, Inc.
> Compiled Fri 11-Jan-08 09:42 by prod_rel_team
> 
> ip route static bfd GigabitEthernet3/2 172.16.1.2
> 
> However this makes me unhappy:
> 
> router#conf t
> Enter configuration commands, one per line.  End with CNTL/Z.
> router(config)#vlan 200
> router(config-vlan)#bfd ?
> % Unrecognized command
> 
> Phil
> 
> 
> 
> On Jan 17, 2008, at 1:38 PM, Arie Vayner (avayner) wrote:
> 
>> BFD for static routes is supported in SRC, which should be out in a 
>> day or two (if they keep their promise ;-) ) 
>> http://www.cisco.com/en/US/products/ps6922/prod_release_note09186a008
>> 0
>> 6c
>> 096f.html#wp4248936
>>
>> Arie
>>
>> -----Original Message-----
>> From: cisco-nsp-bounces at puck.nether.net 
>> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Phil Bedard
>> Sent: Wednesday, January 09, 2008 19:37 PM
>> To: cisco-nsp at puck.nether.net
>> Subject: [c-nsp] BFD for static routes
>>
>> 	Is there BFD support for static routes on anything besides IOS
> XR?
>> Is there a timeline for such support?
>>
>> Phil
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
>