[c-nsp] Differences between WS-C3750E & WS-C3750G switches

[Peter Rathlev]

On Fri, 2008-01-25 at 12:47 -0500, Aaron wrote:
> I'd look at assigning /31s instead. Most recent version of code support it
> now.

IOS 12.2(35)SE5 does for the 3750s yeah, but since Ethernet strictly
speaking never is a point-to-point interface, I don't think Cisco
supports it. Configuring it gives:

Switch(config)#interface GigabitEthernet1/0/1
Switch(config-if)#no switchport
Switch(config-if)#ip address 10.0.0.0 255.255.255.254
% Warning: use /31 mask on non point-to-point interface cautiously
Switch(config-if)#do show version
Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version
12.2(35)SE5, RELEASE SOFTWARE (fc1)
<snip>

But it should work. :-)

Regards,
Peter