[c-nsp] c7600 and VPLS

Mohacsi Janos mohacsi at niif.hu
Tue Jan 29 13:56:47 EST 2008




On Tue, 29 Jan 2008, Dmitry Valdov wrote:

> Hi,
>
> It can't be HW problem because 7206 is software router. May be there is a 
> performance or marketing problem..


That is what I am saying: probably hardware of 7206 is not capable of 
handling it, since it is a SW router ....

>
>
> On Tue, 29 Jan 2008, Mohacsi Janos wrote:
>
>> 
>> 
>> 
>> On Tue, 29 Jan 2008, Luan Nguyen wrote:
>> 
>>> Not ever?
>> 
>> Some experts from Cisco might answer. I think it is mostly HW problem...
>> 
>> Regards,
>> 		Janos
>>> 
>>> Thanks.
>>> 
>>> -lmn
>>> 
>>> On Jan 29, 2008 11:32 AM, Mohacsi Janos <mohacsi at niif.hu> wrote:
>>> 
>>>> 
>>>> 
>>>> 
>>>> On Tue, 29 Jan 2008, Luan Nguyen wrote:
>>>> 
>>>>> Anyone knows when can the 7200VXR support VPLS?
>>>> 
>>>> 
>>>> AFAK VPLS is not supported on 7200VXR.
>>>> Regards,
>>>>                Janos
>>>> 
>>>> 
>>>>> 
>>>>> thanks.
>>>>> 
>>>>> -lmn
>>>>> 
>>>>> On Jan 29, 2008 9:22 AM, Dennis Dubbelman <Dennis at winitu.com> wrote:
>>>>> 
>>>>>> For supporting VPLS on a 7600, OSM or ES20 linecards are needed on the
>>>>>> Core facing interfacces. Those cards will handle the label push and pop
>>>>>> for SVI based interfaces.
>>>>>> 
>>>>>> You can use your defined hardware as a MPLS Access node and terminate
>>>>>> your PW on a VPLS based 7600 router. This router must terminate the
>>>>>> incoming PW's over a OSM or ES20 linecard.
>>>>>> 
>>>>>> Cheers,,
>>>>>> Dennis Dubbelman
>>>>>> 
>>>>>> -----Original Message-----
>>>>>> From: cisco-nsp-bounces at puck.nether.net
>>>>>> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of MKS
>>>>>> Sent: dinsdag 29 januari 2008 15:02
>>>>>> To: cisco-nsp at puck.nether.net
>>>>>> Subject: [c-nsp] c7600 and VPLS
>>>>>> 
>>>>>> Hi
>>>>>> 
>>>>>> I'm a bit confused about hardware support for VPLS and cisco 7600.
>>>>>> 
>>>>>> If I have only LAN cards e.g. 6724 customer facing and 6704 core facing
>>>>>> does that mean that I have no VPLS support or just not H-VPLS ?
>>>>>> 
>>>>>> Can I run some topology of VPLS with only LAN cards (full mesh,
>>>>>> hub-spoke, partial mesh).
>>>>>> 
>>>>>> Regards
>>>>>> MKS
>>>>>> _______________________________________________
>>>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>>> _______________________________________________
>>>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>>> 
>>>>> _______________________________________________
>>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>> 
>>>> 
>>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> 
>
> -- 
> Dmitry Valdov
> CCIE #15379 (R&S and SP)
>


More information about the cisco-nsp mailing list