[c-nsp] 6500 12.2.33-SXH1 modular IOS

[Gregori Parker]

TAC simply said that the modular code wasn't ready, and that I should go
monolithic before troubleshooting further.  That solved the spikes/loss,
so the case was closed.  FYI, that was 12.2.SXF18 modular.  In the lab,
I saw similar results with all the modular SXF releases...they seemed to
correlate with snmp polling (I was running cacti against it).


-----Original Message-----
From: fred at jacobsson.nu [mailto:fred at jacobsson.nu] On Behalf Of Fredrik
Jacobsson
Sent: Tuesday, January 29, 2008 11:59 PM
To: Gregori Parker
Cc: Peter Rathlev; Jeff Fitzwater; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 6500 12.2.33-SXH1 modular IOS

Hi!

What did the TAC say? Do you have a BugID to look for?

Regards
/Fredrik

2008/1/29, Gregori Parker <Gregori.Parker at theplatform.com>:
> Crippled indeed - I had 5sec-CPU samples spiking to 80% and above,
> causing packet loss in our core with all SXF modular releases.
Because
> of this, modular code has been relegated to the most experimental
> reaches of our network lab...I'm in wait-and-see mode for SXH.
>