[c-nsp] 3640 not sending OSPF state traps

[Tassos Chatzithomaoglou]

You need 12.3(14)T or later on 3640.

--
Tassos

Jared Gillis wrote on 2/7/2008 8:36 μμ:
> Hi all,
> 
> I recently turned up a 3640 running 12.3 latest Enterprise code and 
> OSPF. Everything works as expected, except that the device will not send 
> an OSPF trap OSPF state changes on any of it's interfaces. I do receive 
> syslog messages for the OSPF state changes.
> log-adjacency-changes is on in my OSPF config, and all the trap types 
> under "snmp-server enable traps" are active.
> There is no "snmp-server enable traps ospf" command available.
> I tried changing to 12.3 latest IP Plus code, with no change.
> I'm about to try other code versions, possibly even some 12.2 code, but 
> I figure that there's got to be something new to 12.3 or the 3640 that 
> I'm missing.
> Thanks in advance,
>