[c-nsp] 7600 MPLS QoS

[J C]

I've been going through all the documentation regarding MPLS and configuring MPLS QoS on PFC's and I'm stumped on this question.



In the past MPLS networks I've used Pipe Mode with Explicit Null
LSP to configure QoS within the MPLS network. The benefit of this for a
carrier network was that it preserved the customer markings and allowed
us to control the treatment of the traffic right up to (and including)
the egress of the PE to the carrier owned CPE.



>From reading the documentation on the 7600 I don't see anywhere the
ability to use Pipe Mode with Explicit-Null LSP...I only see Uniform
Mode and Short Pipe Mode. Right away Uniform Mode is out of the
question, and Short Pipe mode is the best alternative, but it only
allows you to control the treatment of the traffic until it reaches the
final PE, at which point the traffic has no MPLS EXP bits left on it
and only the original customer markings are left.



So my question is...am I just missing something regarding the 7600
and its ability to support Pipe mode with Explicit-Null? I'm asking
this because I also noticed that 'set qos-groups' is not available to
do on ingress MPLS-MPLS interfaces...



And if this method of MPLS QoS is not supported on the 7600, whats
the next best thing?...Lastly, if Short Pipe Mode is the only
alternative, then how can the SP still control treatment on the Egress
of the final PE...as all MPLS EXP bits will be stripped during the
final 'pop'.



Thanks in advance MPLS guru's!!!!
_________________________________________________________________
Try Chicktionary, a game that tests how many words you can form from the letters given. Find this and more puzzles at Live Search Games!
http://g.msn.ca/ca55/207