[c-nsp] Analog Dialer

[Oliver Boehmer (oboehmer)]

Can't tell based on this config alone. can you please show the full
config? (at least the one of the Serialx/y:z (the D-channel), any dialer
interfaces and the "line" config at the end)?
http://www.cisco.com/en/US/products/hw/univgate/ps505/products_configura
tion_example09186a0080094a49.shtml shows a sample AS5xxx config, which
can easily be adapted to your environment..

	oli


Mad Unix <> wrote on Wednesday, July 09, 2008 8:27 AM:

>  have a PRI connecting 60 ppl using BRI and Analog calls
> the Router 3800 PRI interface is having Digital modem to accept
> analog phone calls
> the analog callers cant connect!
> What could be wrong?
> 
> interface Group-Async1
>  description connected tp Dial-in pcs (Analog)
>  ip unnumbered GigabitEthernet0/0
>  encapsulation ppp
>  no ip split-horizon
>  dialer in-band
>  dialer idle-timeout 3600
>  dialer-group 1
>  async mode interactive
>  peer default ip address pool cisco3662-group-2
>  no fair-queue
>  ppp authentication chap pap ms-chap callin
>  group-range 0/450 0/473
> --
> madunix
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/