[c-nsp] C3560 show version memory values

[Jon Lewis]

On Thu, 10 Jul 2008, Mark Tinka wrote:

> On Thursday 10 July 2008 06:03:31 Jose Leitao wrote:
>
>> Today I upgraded a 3560 to
>> c3560-advipservicesk9-mz.122-44.SE2, and looking at the
>> output of show version, I noticed something rather
>> peculiar:
>>
>> "cisco WS-C3560-24PS (PowerPC405) processor (revision N0)
>> with 0K/8184K bytes of memory"
>
> We are seeing the same issue on our 3560G's running the same
> code.

The good news is, it's obviously a "display" bug, since if there was 0 
processor memory, you wouldn't be able to do a show ver.

I noticed this one yesterday, and didn't post about it because I saw 
others had also recently noticed it and posted about it elsewhere.

On 3550's:

   30 second input rate 0 bits/sec, 0 packets/sec
   30 second ouxtput rate 0 bits/sec, 0 packets/sec

It seems to only contain the typo when the rate is 0.

----------------------------------------------------------------------
  Jon Lewis                   |  I route
  Senior Network Engineer     |  therefore you are
  Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________