[c-nsp] BGP auto-summary [7:131926]

[Ibrahim Abo Zaid]

Hi Ajay

if auto-summary is enabled with classful network command, all spesfic routes
will be summarized to class boundary so for the below example , only
10.0.0.0/8 will be advertised



best regards
--Ibrahim

On Mon, Jul 14, 2008 at 8:39 PM, Ajay Chenampara <ajay_chenampara at yahoo.com>
wrote:

> Hi,
> I was reading the wendell-odom exam guide and have teh following doubt:
>
> When auto-summary is enabled in bgp and the network command has only a
> classful network, what happens if the router has more specific routes?
>
> eg:
>
> ip routing table has routes to
> 10.10.10.0/24, 10.20.0.0/16
>
> router bgp 1
> network 10.0.0.0
> auto-summary
>
> what will the bgp table contain?
>
> will it just be the summary route ?
>
>
>
>
> Message Posted at:
> http://www.groupstudy.com/form/read.php?f=7&i=131926&t=131926
> --------------------------------------------------
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
>
>