[c-nsp] Three STM-1 on one Cisco 7200vxr-npeG1

[Garry]

Samit wrote:
> Hi,
>
> Is it recommended to run three STM-1 (PA-POS-1OC3)  on a single 
> Cisco700vxr with NPE-G1 ?

Technically, it is supported, as each of the two buses have 600 
bandwidth points, with an STM-1 interface taking up 300. Question is 
whether it might be recommendable to get a second router for redundancy 
reasons, e.g. if you are terminating several uplinks with that one 
router. If so, I'd advise against doing it all on one router ...

-garry