[c-nsp] "Total output drops" - congestion ? - 7200-VXR

Farhan Jaffer bandhani at gmail.com
Wed Jul 16 07:59:55 EDT 2008


Have you tried 'hold-queue ...' command. This may resolves your problem.


On Wed, Jul 16, 2008 at 11:22 AM, Wilkinson, Alex
<alex.wilkinson at dsto.defence.gov.au> wrote:
> Hi all,
>
> I am having problems with a particular device going down every 3-4 days.
> The switchport for which this device is connected to is telling me it is
> having a lot of "output drops" e.g.
>
>   Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 13342805
>
> I 'suspect' that these output drops could be the root cause of the device
> attached to this port going down consistently.
>
> Question: Since 'output drops' seems to relate to interface congestion can
>          anyone recommed a tool to 'blast' this particular interface in
>          order to test {in,out}queues and congestion ?
>
>  -aW
>
> IMPORTANT: This email remains the property of the Australian Defence Organisation and is subject to the jurisdiction of section 70 of the CRIMES ACT 1914.  If you have received this email in error, you are requested to contact the sender and delete the email.
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list