[c-nsp] PtP link over FR

[Farhan Jaffer]

Thanks for all.

It was one mistake from my side. I used management interface ip
address for routes on Juniper :)

It's working fine now.

Thanks again.

-FJ


On Thu, Jul 17, 2008 at 4:06 PM, Farhan Jaffer <bandhani at gmail.com> wrote:
> Hi,
>
> There is an interesting situation, let me discuss the scenario first,
>
> Cisco Router A ----(same n/w) ---- Juniper Router -----(FR
> point-to-point pvc) ------- Cisco Router B.
>
> PVC is Active & point to point connectivity is OK. But the ping
> response from cisco router A to B via FR is unreachable & vice versa.
>
> however if i replace Juniper router with Cisco Router, it works fine.
>
> Is there any IP forwarding like thing? or any other problem.
>
> Thanks very much in advance.
>
> -FJ
>