[c-nsp] 6500 rfc 2674 support?

[Phil Mayers]

On Fri, Jul 18, 2008 at 03:42:01PM -0400, Jeff Fitzwater wrote:
>Does anybody know if there is some knob to turn to get the FDB using  
>MIB2 (RFC 2674) qBridgeMIB instead of using the dot1 mib with  
>"indexing" on the bridge table?
>
>When I go after the qBridgeMIB on a 6500 running 12.2(33)SXH or on a  
>3750 running 12.2(44) they return nothing.

I've never seen a Cisco device that supports this, and I spend a fair 
amount of time grubbing around inside snmpwalk output when new IOSes 
appear.

>
>
>  Is there another CISCO MIB that can be accessed without using  
>indexing that contains the BRIDGE FDB with vlan info?
>
>
>It sure would be nice to have this work since all our other switches  
>support it.    We are trying to come up with an accurate way to model  
>L2 VLANs .

Granted that the @vlan is a (tiny) bit tedious to implement, what's 
inaccurate about using the indexed mode?

One thing to note; the rest of the dot1dBridge mib also changes when 
using indexing; in particular if using PVST, the STP-related items are 
the per-vlan ones too (root, root port, etc.) which is actually really 
useful.